Brief
Introduction of Galvanizing Line
Galvanizing
line in JIGANG group Cold Rolling Plant is a domestic
line,Which is designed by Beijing Iron&Steel Research
Institute and manufactured in local workshop.The total
investment of the project is up to 180 million RMB and the
field area 120mu(80,000m²).The galvanizing line was started to
construct in March,2003,and put into production on May 24
th
,2004.
The
UEC process applied in our galvanizing line is techni-cally
supervised by Beijing Iron&Steel Research Institute. The
main equipments in the line,such as welder and air-knife are
supplied by VAI,Others are manufactured in local workshop.The
galvanizing line is comprised of pay-off reel,pinch
leveler,cross shear,C-flat narrow lap seam welder,electrolyze
degrease cleaning device,deoxidize annealing furnace,zinc
pot,air-knife,skin pass mill,tension leveler,passivation
device,electrostatic oiler, coiler,etc.
The
design capacity is 200,000 tons/a.The main product
specification is 0.2--1.2mm thick and 800--1250mm wide.The
line can produce hot-galvanizing strip steel with 60--275g/m²
normal zinc spangle,small spangle and polishing spangle.The
coil inner diameter is 508mm.Weight is 5--15 tons.The
prod-ucts are mainly used in the architectural industry and
light industry.